Graphite micro powder grinding mill
Then you can use the micro powder grinding mill.
which is high fineness and flexible adjustment.the final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh(47-5 micron)。
Under the same finished final size and the same motor power,the capacity of micro powder grinding mill is twice as much as jet mill,mixing grinder and ball mill,and energy consumption decreased 30%.
As no rolling bearings or screws in grinding cavity,there are no problems caused by bolts shedding or rapid wear of bearings and seal components.besides,powder grinding mill is convenient adjusting,
more uniform particle size.the application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
The Main Specifications of Micro Powder Grinding Mill
model |
HGM80 |
HGM90 |
HGM100 |
HGM100A |
HGM125 |
Ring Diameter(mm) |
800 |
930 |
1035 |
1035 |
1300 |
Ring Number(layer) |
3 |
3~4 |
3 |
4 |
4 |
Roller Number(piece) |
21 |
24~32 |
27 |
34~36 |
40~44 |
Main Shaft Speed(r.p.m) |
230~240 |
200~220 |
180~200 |
180~200 |
135~155 |
Input Size(mm) |
≤20 |
≤20 |
≤20 |
≤20 |
≤20 |
Finished Size(um/mesh) |
5~47(325-2500) |
5~47(325-2500) |
5~47(325-2500) |
5~47(325-2500) |
5~47(325-2500) |
Capacity(t/h) |
0.5~4.5 |
0.6~6.5 |
0.7~7 |
1~8.5 |
1.5~12 |
Overall Dimension(L*W*H,m) |
13.9*4*6.2 |
14.7*4.8*7.2 |
18*4.6*8.6 |
18*4.6*8.6 |
14*9*10.25 |
Motor Power(KW) |
145~165 |
185~204 |
263 |
263~290 |
380~430 |
Use the
Micro Powder Grinding Mill can make the graphite reach 5 micron.